Merchants bars | Comexbo société de négoce de produits sidérurgiques et de bois

Round irons Read more X

Comexbo could offer you with following quality :
S235/s275/s355.

Rolling tolerances with following standard : EN10060:2003.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Flat irons Read more X

Comexbo could offer you with following quality :
S235/s275/s355.

Rolling tolerances with following standard : EN10058:2003.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Wide flat irons Read more X

Comexbo could offer you with following quality :
S235/s275/s355/c10/c15/c16/16MnCrS5/C22/C25/C30/C35/C40/C45/C50/C55/C60/25CrMo4/41Cr4/42CrMo4/51CrV4/27MnCrB5/30MnB5/grade A/C45U/80mN2v/90MnCrV8/100MnCrW4/60WCrV7/37Cr5MoV/63Cr5MoV/40CrMnMo7/40CrMnMoS8.

Rolling tolerances with following standard : DIN59200.

Comexbo could offer you with different surfaces finishes :

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Square Irons Read more X

Comexbo could offer you with following quality : s235/s275/s355.

Rolling tolerances with following standard : EN10059:2003.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Equal angles Read more X

Comexbo could offer you with following quality : S235/s275/s355.

Rolling tolerances with following standard : EN10056-2:1994.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Unequal angles Read more X

Comexbo could offer you with following quality :
S235/s275/s355.

Rolling tolerances with following standard : EN10056-2:1994.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

T Read more X

Comexbo could offer you with following quality :
S235/s275/s355.

Rolling tolerances with following standard : EN10055:1995.

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised Galvanisé to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

C profile Read more X

Comexbo could offer you with the following quality :
S235JR.

Comexbo propose to you different finishes :

Black
Galvanised
Send blasted and pre galvanised

Technical specifications

U-irons Read more X

Comexbo could offer you with following quality :
S235JR/s275JR/s355JR.

Rolling tolerances with following standard : EN10279:2000

Comexbo could offer you with different surfaces finishes:

Black
Hot galvanised to dipping with following standards: EN ISO 1461
Send blasted SA 2.5 + pre-galvanised (Red or Grey)

Comexbo could offer you with différents finishings:
Straight Cut / Bias Cut / drilling / marking

Technical specifications

Ø (mm)	WEIGHT IN KG/M	Ø (mm)	WEIGHT IN KG/M
6	0,22	40	9,86
8	0,39	45	12,50
10	0,62	50	15,40
12	0,89	55	18,60
14	l,21	60	22,20
16	1,58	65	26,00
18	2,00	70	30,20
20	2,47	75	34,70
22	2,98	80	39,50
24	3,55	85	44,50
25	3,85	90	49,90
28	4,83	95	55,60
30	5,55	100	61,70
32	6,31	105	68,00
35	7,55

WIDTH (mm)	WEIGHT IN KG/M
	THICKNESS (mm)
	3	4	5	6	7	8	10	12	14	15	16	20	25	30	40
10	0,236	0,314
12	0,283	0,377	0,472	0,565
14	0,330	0,440	0,550	0,660		0,880
16	0,377	0,503	0,628	0,754		1,006	1,26
18	0,424	0,565	0,707	0,848		1,130	1,41
20	0,472	0,628	0,785	0,942		1,250	1,57	1,88	2,20	2,36	2,51
25	0,590	0,785	0,980	1,180		1,570	1,96	2,35	2,75	2,94	3,14
30	0,707	0,942	1,180	1,410	1,65	1,880	2,36	2,83	3,30	3,53	3,77	4 ,71
35	0,824	1,100	1,370	1,650		2,200	2,75	3,30	3,85	4,12	4,40	5,50
40	0,942	1,250	1,570	1,880	2,20	2,510	3,14	3,77	4,40	4,71	5,02	6,28	7,85	9,42
45	1,060	1,410	1,770	2,120		2,820	3,53	4,24	4,95	5,30	5,65	7,07	8,83	10,60
50	1,170	1,570	1,960	2,360	2,75	3,140	3,93	4,71	5,50	5,89	6,28	7,85	9,81	11,80
60	1,410	1,880	2,360	2,830	3,30	3,770	4,71	5,65	6,60	7,07	7,54	9,42	11,80	14,13	18,84
70	1,640	2,200	2,750	3,300		4,400	5,50	6,60	7,70	8,24	8,79	11,00	13,74	16,50	22,00
80	1,880	2,510	3,140	3,770		5,020	6,28	7,54	8,79	9,42	10,05	12,56	15,70	18,84	25,10
90			3,530	4,240		5,650	7,07	8,48	9,89	10,60	11,30	14,10	17,70	21,20
100	2,350	3,140	3,920	4,710		6,280	7,85	9,42	11,00	11,80	12,60	15,70	19,60	23,55	31,40
110						6,910	8,64	10,36		12,95		17,30
120		3,760	4,710	5,650		7,540	9,42	11,30	13,20	14,13	15,07	18,84	23,55	28,26	37,68
130				6,120		8,160	10,20	12,25		15,30		20,40
140			5,480	6,600		8,790	10,99	13,20	15,40	16,50	17,60	21,98	27,47	32,97	43,96
150			5,890	7,070		9,420	11,78	14,13	16,48	17,66	18,84	23,55	29,43	35,32

WIDTH (mm)	WEIGHT IN KG/M
	THICKNESS (mm)
	5	6	8	10	12	15	20	25	30	40
160	6,28	7,54	10,05	12,56	15,07	18,84	25,12	31,40	37,68	50,24
180	7,07	8,48	11,30	14,13	16,96	2 120	28,26	35,33	42,39	56,52
200	7,85	9,42	12,56	15,70	18,84	23,55	31,40	39,25	47,10	62,80
220		10,35	13,82	17,26	20,72	25,90	34,53	43,17	51,80	69,06
250		11,77	15,70	19,63	23,55	29,44	39,25	49,06	58,88	78,50
300		14,13	18,84	23,55	28,26	35,33	47,10	58,88	70,65	94,20

DIMENSION (mm)	WEIGHT IN KG/M	DIMENSION (mm)	WEIGHT IN KG/M
6	0,28	35	9,62
8	0,50	40	12,60
10	078	45	15,90
12	1,13	50	19,60
14	1,54	55	23,70
15	1,77	60	28,30
16	2,01	70	38,50
18	2,54	80	50,20
20	3,14	90	63,60
22	3,80	100	7 850
25	4,91	120	113,04
30	7,07

A x B	E	WEIGHT IN KG/M
MM		WEIGHT IN KG/M
10 x 10	1,5	0,206
15 x 15	2	0 324
15 x 15	2	0,419
20 x 20	2	0 441
20 x 20	2	0,576
25 x 25	2	0,733
30 x 30	2	0,89
30 x 30	2,5	1,096
30 x 30	3	1,296
35 x 35	3	1,293
35 x 35	3	1,532
40 x 40	2	1,204
40 x 40	2,5	1,489
40 x 40	3	1 767
40 x 40	4	2,305
50 x 50	3	2,238
60 x 60	3	2,709
60 x 60	4	3,561
70 x 70	4	4,189
80 x 80	5	5,957
100 x 100	5	7,527

Submit an unsolicited application

Merchants bars A wide range of products dedicated to professionals

AxD	B	C	F	E	WEIGHT IN KG/M
MM					WEIGHT IN KG/M
5	14	20	10	15	0,567
7,5	15	30	15	1,5	0 767
10	20	40	20	2	1,361
12,5	25	40	15	2	1,597
12,5	25	50	25	3	2,476
20	40	80	40	3	4,242
20	40	80	40	4	5,448
15	40	100	70	2,5	3,798
15	40	120	90	3	4,949
20	50	140	100	3	6,129
25	50	100	50	3	5,421
25	62,5	125	75	5	10,48
25	80	160	110	5	12,918

DIMENSION (mm)	WEIGHT IN KG/M
30 x 15 x 4	1,74
35 x 17,5 x 4	2,15
40 x 20 x 5	2,87
50 x 25 x 5	3,85
60 x 30 x 6	5,07
70 x 40 x 6	6,77

DIMENSION (mm)	WEIGHT IN KG/M	DIMENSION (mm)	WEIGHT IN KG/M
20 x 20 x 3	0,88	50 x 50 x 6	4,44
25 x 25 x 3,5	1,29	60 x 60 x 7	6,23
30 x 30 x 4	1,77	70 x 70 x 8	8,32
35 x 35 x 4,5	2,33	80 x 80 x 9	10,70
40 x 40 x 5	2,96	l00 x l00 x 11	16,40
45 x 45 x 5,5	3,67